Vivreau V3-205 Скачать руководство пользователя страница 15

V3-205 Dispensing System Owner’s Manual

    

15

Section 5

Operation

BOTTLE CLEANING INSTRUCTIONS

 IMPORTANT _________________________

Use ONLY Vivreau Dishwasher and Storage 
Racks.

Make sure the Bottling System and surrounding 
areas are kept clean and sanitary.
After Bottles have been used, empty remaining 
contents and place Bottles in Red Storage Racks.

CLEAN

USED

Bottle Storage

Bottles MUST be handled with care and should 
not be allowed to rub and bang together. This 
could cause weakness in the glass, which may 
not be visible.

ALWAYS use Vivreau Storage and Dishwasher 
Racks.

DO NOT empty into Vivreau V3-205 Dispensing 
System  Drip Tray.
New Bottles MUST be sanitized before first use.

ALWAYS inspect Bottles for damage. Any Bottles 
showing signs of damage or cracks should be 
discarded and recycled appropriately.

ALWAYS visually check Bottles for food particles 
or any other solids.

ALWAYS wash Bottles in a three compartment 
sink (wash water, rinse water and sanitizer) in 
accordance with Local Health Codes.

ALWAYS sanitize Bottles in dishwasher.

ALWAYS place Bottles upside down in Bottle 
Washing Rack.

Bottle Storage

ALWAYS leave Caps attached to Bottle during 
sanitization. DO NOT close Cap.

ALWAYS keep Bottles in tray and remove from 
washer after Sanitization Process.

ALWAYS leave Bottles in tray until cool and dry. 
DO NOT close Cap.

ALWAYS secure Cap after Bottles have cooled.

ALWAYS visually inspect Bottles for damage 
before storing.

ALWAYS place Bottles upright in Blue Storage 
Racks.
Storage Racks can be stacked.

ALWAYS place plastic film over the top crate to 
ensure exterior of Bottles are kept clean.

THE VIVREAU WATER BOTTLING SYSTEM

Eliminates the need for plastic-bottled mineral 
water.
Helps reduce the unnecessary disposal of tens 
of billions of plastic bottles.
Reduces Carbon Footprint by eliminating the 
unnecessary daily transportation (ships, trains 
and trucks) of bottled water.
Water is filtered on demand using advanced 
micro-filtration eliminating 99.99% of bacteria, 
contaminants, additives, such as chlorine, odors 
and other impurities while allowing the natural 
minerals to remain for a clean, clear taste.

Содержание V3-205





























Отзывы: