Vivreau V3-205, Руководство пользователя, Страница: 14 / 28

14
V3-205 Dispensing System Owner’s Manual
Section 5
Operation
LED DISPLAY PANEL
The LED Display Panel indicates the status of the
unit and is located on the front panel of the unit.
LED Display Panel Location and Lights
POWER: When the Dispensing System is
plugged in and turned ON, a Blue LED will be
illuminated.
CHANGE CO
2
: When the CO
2
supply is low, a
Red LED will illuminate and the unit will beep;
alerting you to change the CO
2
Cylinder.
CALL SERVICE: If there is a problem, a Red LED
will illuminate and the unit will beep. Please
contact Vivreau Service Toll-Free at 877-999-
1044 immediately.
EMPTY DRIP TRAY (Not Activated on this unit):
When the Drip Tray Container is FULL, a Red LED
will illuminate and the unit will beep; alerting
you to empty the Drip Tray Container located
just inside the cabinet front door or below the
Dispensing System.
AFTER DAILY USE
At the end of service, remove the Black Dispenser
Nozzle and soak in Sanitizing Solution for a
minimum of four (4) hours.
Remove Dispenser Nozzles
Always wear protective gloves when in contact
with Sanitizing Solution.
The Dispenser and unit should be wiped down
with Sanitizing Solution to keep the Dispensing
System clean and in hygienic condition.
Clean Drip Tray
Once the unit is wiped down and Nozzle removed,
the Dispenser must be wrapped in plastic wrap
to prevent contamination and misuse while not
in service.
To return the Vivreau V3-205 Dispensing
System to service remove all plastic wrap and
rinse Dispenser Nozzle.
Reinstall the Nozzle into the Dispenser Head.