Vivreau V3-205 Скачать руководство пользователя страница 22

22

  

V3-205 Dispensing System Owner’s Manual

Section 6
Maintenance

AFTER LONG IDLE PERIODS

WARNING

  Danger to health from a lack of 

sanitization!

Bacteria and germs can form if the Dispensing 
System has been disconnected from the power 
supply for longer than 72 hours.

After a longer idle period or a power failure, 
proceed as follows:

Remove the plastic film from the Dispensing 
Head.
Clean the following areas with antibacterial 
cloths and Sanitizing Spray:

•  Dispensing Nozzle
•  Dispensing Head
• 

Drip Tray

•  Cabinet surfaces

Plug in the unit.
Open the Water Supply Valve to restore the 
water to the unit.
Place a suitable container on the Drip Tray.
Rinse the Dispensing System by running 0.5 
gallons of still water.

 IMPORTANT _________________________

After an idle period of four weeks or more, rinse 
the Dispensing System by running 5.0 gallons 
of still water.

Remove the DO NOT USE sign.
Unit is ready for normal use.

LEAK PROCEDURES

Leaks in equipment can occur even if all 
precautions and procedures have been followed 
properly.
Follow the procedures listed below in the event 
of a leak.

WATER

Disconnect the Water Dispenser from the power 
supply.
Disconnect the water supply by closing the 
Water  Supply Valve.
Clean up the leaked water from the area.
Indicate the Vivreau V3-205 Dispensing System 
is out of service by hanging a DO NOT USE 
sign on the Dispensing Head.
Contact Vivreau Service Toll-Free at 877-999-1044.

REFRIGERANT

Disconnect the Water Dispenser from the power 
supply.
Disconnect the Water Supply by closing the 
Water  Supply Valve.

WARNING

  Contact with refrigerant is 

hazardous to your health! Avoid contact!

Indicate the Vivreau V3-205 Dispensing System 
is out of service by hanging a DO NOT USE 
sign on the Dispensing Head.
Contact Vivreau Service Toll-Free at 877-999-1044.

ELECTRIC SHOCK

Disconnect the Water Dispenser from the power 
supply.
Disconnect the water supply by closing the 
Water  Supply Valve.

DANGER

  Risk of Electrocution! Unplug 

equipment or turn off supply circuit breaker 
immediately.

After removing the immediate danger, Contact 
Vivreau Service Toll-Free at 877-999-1044.

Indicate the Vivreau V3-205 Dispensing System 
is out of service by hanging a DO NOT USE 
sign on the Dispensing Head.

Содержание V3-205





























Отзывы: