Vivreau V3-205, Руководство пользователя, Страница: 11 / 28

V3-205 Dispensing System Owner’s Manual
11
Section 4
Pre-Installation Requirements
PRE-INSTALLATION REQUIREMENTS
INTRODUCTION
The Vivreau V3-205 Dispensing System is
an under-counter Water Dispensing System.
Chilled water is available from Dispensers
that provide Still and Carbonated Water from
individual faucets.
Vivreau V3-205 Dispensing System
PRE-INSTALLATION
Below are the services required to be in place
prior to the installation of the Vivreau V3-205
Dispensing System. If you have any questions
regarding these or other services, please contact
Vivreau Service Toll-Free at 877-999-1044.
WATER SUPPLY
One (1) potable 1/2” cold water supply terminating
in a 1/2” NPT Ball Valve, 1/2” female pipe thread.
IMPORTANT _________________________
Ball Valve must be accessible for service and
installation.
Minimum Water Pressure: 50 PSI
Minimum Water Flow: 80 gallons per hour
IMPORTANT _________________________
The Vivreau V3-205 Dispensing System
incorporates back-flow prevention. Any additional
back-flow devices required by Federal, State or
Local Code must also be supplied by the customer
prior to installation. There must not be any other
Filters/Pre-Filters inline before the unit.
ELECTRICAL OUTLET
Model V3-205
(1) 15 Amp Electrical Receptacle (NEMA 5-15R)
120V, 60 Hz (11 Amps)
CO
2
CO
2
Cylinder (Customer supplied) - Size should
be selected based on available space. A 20 lb.
cylinder is typical.
NOTE: If connecting to a bulk or existing CO
2
system, a CO
2
line terminating at a 1/4” Barbed
Shutoff Valve must be available within 40” of
the unit with 100 PSI minimum pressure.
DRIP TRAY AND DISPENSING HEAD
CUTOUTS
Cut out the holes for the Drip Tray and Dispensing
Head per the supplied template.
NOTE: The Dispensing Head must be mounted
on the work surface directly above the Chiller/
Carbonator.
1 5
/
8
"
2
7
/
8
"
3
7
/ 8
"
5
1
/
8
"
12
1
/
8
"
Dispensing Head Dimensions