Vivreau V3-205, Руководство пользователя, Страница: 13 / 28

V3-205 Dispensing System Owner’s Manual
13
Section 5
Operation
OPERATING INSTRUCTIONS
The Vivreau V3-205 Dispensing System is
designed for ease of use.
IMPORTANT _________________________
Before operating the Vivreau V3-205 Dispensing
System, make sure the water supply is turned
ON and the unit is plugged in.
BEFORE USE
ALWAYS sanitize your hands.
ALWAYS wear hygienic gloves.
ALWAYS remove anti-bacterial cling film from
the Dispensing Head.
ALWAYS wipe Dispensing Head, Nozzle, Drip
Tray and cabinet work-surface with anti-bacterial
wipes.
DISPENSING
Before operating either the Vivreau V3-205
Dispensing System, make sure the Water Supply
Valve is open and the unit is plugged in.
Place appropriate container on Drip Tray beneath
Dispensing Head.
Chilled Still Water
Pull DOWN on Blue Dispenser Handle. Push
Dispenser Handle UP when full.
Dispensing Chilled Still Water
Chilled Sparkling Water
Pull DOWN on Green Dispenser Handle. Push
Dispenser Handle UP when full.
Dispensing Chilled Sparkling Water
The Dispenser Handles should be fully opened
when filling and fully closed when filling is
complete.
IMPORTANT _________________________
Do not allow the Dispenser Handles to slam shut.
The Dispenser Handles must be closed after
each Bottle is filled.
The Vivreau V3-205 Dispensing System is designed
to fill Bottles of up to one (1) liter, one Bottle at a time.
Vivreau Bottles should be filled to the line in the
neck just below the Cap.
IMPORTANT _________________________
Sparkling Water requires room for the CO
2
gas
to expand.
At the end of service, remove the Black Dispenser
Nozzles and soak in Sanitizing Solution.
The Dispensers and unit should be wiped down
with Sanitizing Solution to keep the Dispensing
System clean and in hygienic condition.
Once the unit is wiped down and Nozzles
removed, both Dispensers must be wrapped
in plastic wrap to prevent contamination and
misuse while not in service.
To return the Vivreau V3-205 Dispensing System
to service remove all plastic wrap and rinse
Dispenser Nozzles.
Reinstall the Nozzles into the Dispenser Head.