Vivreau V3-205, Руководство пользователя, Страница: 21 / 28

V3-205 Dispensing System Owner’s Manual
21
Section 6
Maintenance
SECURE CYLINDER
Move empty Cylinder to storage area and secure
safely.
Remove the plastic plug or tape from the new
full Cylinder outlet and discard it.
IMPORTANT _________________________
To avoid confusion, do not replace plastic plugs
in the outlet of empty CO
2
Cylinders.
WARNING
Wear protective gloves and safety
glasses when purging Cylinder. Be sure to point
the Cylinder outlet away from your body.
Purge the replacement Cylinder by quickly
opening and closing the Valve on top to clear
any dust or moisture from the outlet.
Connect the High-Pressure Hose or Primary
Regulator. Make sure the Sealing Washer is
seated correctly.
Tighten the Nut firmly using a wrench.
Open the Valve on top of the Cylinder.
Check for leaks using a solution of soapy water
or a commercial equivalent.
Checking for Leaks
STANDING IDLE
Before Long Idle Periods
If the V3-205 Dispensing System will be idle for
more than 3 days:
Unplug the unit.
Close the Water Supply Valve.
Clean the following with antibacterial wipes and
disinfectant spray:
• Dispensing Nozzle
• Dispensing Head
•
Drip Tray
• Cabinet surfaces
Hang the DO NOT USE sign on the Dispensing
Head to ensure the Dispensing System will not
be used while the water supply is disconnected.
Cover the Dispensing Head with plastic film.
IMPORTANT _________________________
If the Carbonator Pump Protection has switched
OFF the Carbonator Pump, then the unit must
be reset. To reset the unit, unplug the Power
Cord and plug it back in.
STANDING IDLE
Before Long Idle Periods
If the Vivreau V3-205 Dispensing System will be
idle for more than 3 days:
Unplug the unit.
Close the Water Supply Valve.
Clean the following with antibacterial wipes and
disinfectant spray:
• Dispensing Nozzle
• Dispensing Head
•
Drip Tray
• Cabinet surfaces
Hang the DO NOT USE sign on the Dispensing
Head to ensure the Dispensing System will not
be used while the water supply is disconnected.
Cover the Dispensing Head with plastic film.