Vivreau V3-205, Руководство пользователя, Страница: 17 / 28

V3-205 Dispensing System Owner’s Manual
17
Section 6
Maintenance
MAINTENANCE
MAINTENANCE RECOMMENDATIONS
Keep the unit at peak efficiency by performing
all scheduled maintenance procedures that are
recommended by the manufacturer. Proper
maintenance will allow the best performance
and a longer working life.
WARNING
Before performing any service
procedure, perform all safety procedures. In
particular, turn OFF the water supply, disable
the electricity at the main circuit breaker
and prevent access to all devices that might
cause unexpected health and safety hazards
if turned ON.
WARNING
Before performing any service
that involves electrical connection or
disconnection and/or exposure to electrical
components, ALWAYS follow the Electrical
LOCKOUT/TAGOUT Procedure. Disconnect all
circuits. Failure to comply can cause property
damage, injury or death.
At the end of each day or whenever necessary, be
sure to clean:
• Dispensing Head/Nozzle
•
Drip Tray
• The surrounding work area
Every year, have skilled, authorized personnel
perform the following operations:
• General check of the unit
• Identify and replace worn parts
IMPORTANT _________________________
Record all yearly inspections.
IMPORTANT _________________________
Contact the factory, the factory representative
or an authorized service agent to perform
maintenance and repairs.
ELECTRICAL LOCKOUT/TAGOUT
PROCEDURE
WARNING
Before performing any service
that involves electrical connection or
disconnection and/or exposure to electrical
components, ALWAYS follow the Electrical
LOCKOUT/TAGOUT Procedure. Disconnect all
circuits. Failure to comply can cause property
damage, injury or death.
The Electrical LOCKOUT/TAGOUT Procedure is
used to protect personnel working on an electrical
unit. Before performing any maintenance or
service that requires exposure to electrical
components, follow these steps:
In Electrical Box, place unit Circuit Breaker into
OFF position.
Place a lock or other device on the Electrical Box
Cover to prevent someone from placing Circuit
Breaker in the ON position.
Place a tag on Electrical Box Cover to indicate
that unit has been disconnected for service
and power should not be restored until tag is
removed by maintenance personnel.
Disconnect the unit’s Power Cord from Electrical
Outlet.
Place a tag on the Power Cord to indicate that
the unit has been disconnected for service
and power should not be restored until tag is
removed by maintenance personnel.