Transcendent IP Cameras v4: Operation Manual
5
2 IE Remote Access
2.1 LAN
In LAN, there are two ways to access the IP-Cam: 1. access through IP-Tool; 2. directly access through
IE browser.
1.1.1
Access through IP-Tool
Network connection:
� Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC from
the CD.
②
Double click the IP-Tool icon on the desktop to run this software as shown below:
③
Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the right side.
Modify the IP address and gateway of the camera and make sure its network address is in the same
local network segment as that of the computer. Please modify the IP address of your device according
to the practical situation.
