Transcendent IP Cameras v4: Operation Manual
25
1. Auto-focusing function should not been enabled for exception detection.
2. Try not to enable object removal detection when light changes dramatically in the scene.
1.5.3
Line Crossing
Line Crossing
: The relevant alarms will be triggered if someone or something crosses the pre-defined
alarm lines.
Go to Config
à
Event
à
Line Crossing interface as shown below.
1. Enable line crossing alarm and set the alarm holding time.
2. Set alarm trigger options. The setting steps are the same with that of motion detection. Please refer
to motion detection chapter for details.
3. Click “Save” button to save the settings.
4. Set area and sensitivity of the line crossing alarm. Click “Area and Sensitivity” tab to go to the
interface as shown below.
