Transcendent IP Cameras v4: Operation Manual
37
1.6.11
Online User
Go to Config
à
Security
à
Online User. You can view the user who is viewing the camera.
1.6.12
Block and Allow Lists
Go to Config
à
Security
à
Block and Allow Lists interface as shown below.
Setting steps are as follows:
Check “Enable IP address filtering” check box.
Select “Block the following IP address”, input IP address in the IP address list box and click “Add”
button. The operation step of “Allow the following IP address” and MAC address filter settings are the
same with “Block the following IP address”.
After you set the IP address or MAC address, the system will block or allow the user using the added
IP address or MAC address to access the camera.
4.2 Maintenance Configuration
1.6.13
Backup and Restore
Go to Config
à
Maintenance
à
Backup & Restore.
