Transcendent IP Cameras v4: Operation Manual
19
1.4
Alarm Configuration
Alarm configuration includes two submenus: Motion Detection and Alarm Server.
1.4.1
Motion Detection
Go to Alarm
à
Motion Detection to set motion detection alarm.
1. Check “Enable Alarm” check box to activate motion based alarm, choose alarm holding time and set
alarm trigger options.
Trigger Snap:
If selected, the system will snap images on an alarm and save the images to the SD
card.
Trigger SD Recording:
If selected, the recording will be triggered and saved to the SD card on an
alarm.
Trigger Email
: If “Trigger Email” and “Attach Picture” checkbox is checked (email address shall be
set first in the Email configuration interface), the captured pictures and triggered event will be sent to
those addresses.
Trigger FTP
: If “Trigger FTP” and “Attach Picture” checkbox is checked, the captured pictures will
be sent to the FTP server address. Please refer to FTP configuration chapter for more details.
2. Set motion detection area and sensitivity. Click “Area and Sensitivity” tab to go to the interface as
shown below.
