Transcendent IP Cameras v4: Operation Manual
21
Set the alarm time from Sunday to Saturday for alarm everyday in one week. The lengthwise means
one day of a week; the rank means 24 hours of a day. Green means selected area. Blank means
unselected area.
“Add”: Add the schedule.
“Erase”: Delete schedule.
Holiday Schedule
Set time for alarm in Holiday time line.
Set a date in the “Date” box, click “Add” button to add that date to the list box on the right side and
then drag the scroll bar to set the schedule of that day.
Select a date in the list box on the right side, and click “Delete” to remove the schedule on that day.
Click “Save” button to save the settings.
1.4.2
Alarm Server
Go to Alarm
à
Alarm Server interface as shown below.
Input the alarm server address and port. When an alarm happens, the camera will automatically transfer
the alarm event to the alarm server. If the alarm server is not used, there is no need for you to configure
here.
1.5
Event Configuration
Event configuration includes four submenus: Object Removal, Exception, Line Crossing and Intrusion.
Note: Some software versions of this series of cameras may not support the following functions.
Please take actual displayed interface as final.
1.5.1
Object Removal
To set object removal:
Go to Config
à
Event
à
Object Removal interface as shown below.
