Transcendent IP Cameras v4: Operation Manual
28
will change so greatly that the algorithm will stop working temporarily.
2. Try not to enable intrusion detection when light changes dramatically in the scene.
3. Adequate light and clear scenery are very important to intrusion detection.
4. Adjust the camera to make the detection area in the center of the video image. The detected object
should be in the detection area for about two seconds at least. Make sure no obstructions are in the
main crossing area. It is strongly recommended to make the obstructions (like trees, bushes, flags, etc.)
outside the detection area.
Here we take some improper application scenarios for instance.
1.6
Network Configuration
1.6.1
TCP/IP
Go to Config
à
Network
à
TCP/IP interface as shown below. There are two ways for network
connection.
Use IP address (take IPv4 for example)-
There are two options for IP setup: obtain an IP address
automatically by DHCP protocol and use the following IP address. Please choose one of the options for
The camera’s angle of view
is not wide enough; there are
so many trees in the scene.
The above mentioned
environment is too complex
to detect the intrusion.
