Transcendent IP Cameras v4: Operation Manual
30
1.6.3
Server Configuration
This function is mainly used for connecting network video management system.
1. Check “Enable”.
2. Check the IP address and port of the transfer media server in the Transcendent VMS. Then enable
the auto report in the Transcendent VMS when adding a new device. Next, input the remaining
information of the device in the Transcendent VMS. After that, the system will auto allot a device ID.
Please check it in the Transcendent VMS.
3. Input the above-mentioned server address, server port and device ID in the responding boxes. Click
“Save” button to save the settings.
1.6.4
DDNS
If your camera is set to use PPPoE as its default network connection, DDNS should be set for network
access. Before you set the DDNS, please make sure you have registered a domain name on the DDNS
server.
1. Go to Config
à
Network
à
DDNS.
2. Apply for a domain name. Take www.dvrdyndns.com for example.
Input www.dvrdydns.com in the IE address bar to visit its website. Then click “Registration” button.
