CONFIDENTIAL
– This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.
LW Player User Guide v2.6
page 65 / 70
9.2.
RS422+PlaybackConQueue+VgaMon Assembly
To Set RS422+PlaybackConQueue+VgaMon Assembly
1.
Start PlayerLW application.
2.
Add a file or group of files to playlist.
3.
Open VTR Tab.
4.
Check “Enable VTR” box. Checking the box PlayerLW sets
“RS422+PlaybackConQueue+VgaMon” Assembly.
Once VTR mode is enabled, the buttons from Playback menu group on Decode Tab (page 16
(7,8,9) ) must not be used to control the playback. Only Playback control commands in Live
Wire Setting Page, VTR Tab controls and RS-422 controller can be used to manage the
playback.
There are two additional components in this assembly:
Playback Controller and RS422 Connection.
All other components are repeated from “Queue+VGAMon” Assembly. Therefore the
environment, which the components employ in continuous playback, implements in the
“RS422+PlaybackConQueue+VgaMon” Assembly.
Playback Controller
1.
Expand
“Not Associated Component/Playback Controller”, set “Index Loading Mode”
parameter to “Load or build+write” and set “Enable trick mode” to ON. If the chosen
MPEG2 files have not been indexed yet, PlayerLW makes indexing immediately. This
process takes some time. It depends on duration of the selected file or duration of the playlist.
Please wait for the end of the indexing process. Indexing is complete when the “Enable trick
mode” changed to « ON ».
Note: PlayerLW writes the index file, named chosen_file.id2, to the directory
where the chosen file.
The “Enable trick mode” parameter sets to “OFF” every time when PlayerLW application
starts or changing ordering of files in the playlist happens. When “Enable trick mode” is
