CONFIDENTIAL
– This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.
LW Player User Guide v2.6
page 54 / 70
Allows shifting picture by the value to conform to different NTSC’s Standard. (CEA-861D
specifies lines 22–261 and 285–524 for active video. IEC 61834-2, ITU-R BT.1618, and
SMPTE 314M (DV formats) specify lines 23–262 and 285–524 for active video. ITU-R
BT.656 specifies lines 20–263 and 283–525 for active video, resulting in 487 total active
lines per frame.)
Disable Clipping of SDI Value:
Enable/Disable PLUGE Pattern for testing of SDI input. If SDI signal is out of band the
HDM board shows black or white picture on the output.
Synchro Group Number:
Set a group number to join few boards in order to manage them synchronously.
Disable Time Code Recalculation:
Default value is OFF – in this mode HDM board reduces the start time code to zero for a file
which start time code is different to 00:00:00:00.
Set ON if you need to keep the initial time code value as it is.
Primary Channel – HD-SDI Output
Monitor Type:
Available modes:
-
16x9
-
4x3
Out Resolution
: Set the output resolution of the primary video channel.
Available resolutions:
o
PAL, NTSC
o
720p25; 720p29,97; 720p30; 720p50; 720p59,94; 720p60
o
1080i23,976; 1080i24; 1080i25; 1080i29,97; 1080i30
o
1080p23,976; 1080p24; 1080p25; 1080p29,97; 1080p30;
1080p50; 1080p59,94; 1080p60
Use AFD
:
HDM850 transmits AFD (Active Format Description) information, which is contained in
decoded MPEG file.
Fit Mode:
Specify rules of picture transformation when input aspect ratio is different to
output aspect ratio.
-
Fit to Output: stretch 4x3 to 16x9 or squeeze 16x9 to 4x3.
