CONFIDENTIAL
– This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.
LW Player User Guide v2.6
page 63 / 70
WSS (Wide Screen Signalling) Waveform: provide aspect ratio data in PAL/NTSC
WF TC First Line insertion
: Specify the first line of waveform time code. (Default 14)
WF TC Second Line insertion
: Specify the second line of waveform time code.
(Default 16)
WF Closed Caption Line insertion
: Specify the line of EIA608 waveform closed
captioning. (Default 21)
Enable RDD11 rendering:
Activate RDD11 data rendering form an entry file. NOTE:
Lines, which transmits RDD11 data, is specified in a decoded file. If specified lines are the
same as closed caption’s line and/or time code’s lines, the CC data in this line will be crossed
out by RDD11 data.
Time Dropframe Enable:
According to SMPTE12 activate drop frame calculation for
NTSC fps. Set “ON” to get the dropped time code for VITC and LTC. This option turns on
only when “Put Internal Time code” is turned on.
Put Internal Timecode:
Set “ON” if a file doesn’t contain time code, like AVC files, or time
code should be recalculated.
Example
: Need to recalculate NTSC file with non-dropped and jumped time code to drop
frames direct time code:
Set Put Internal Time code – the board recalculate time code.
Set Time Drop frame Enable – the board makes dropped frame time code.
CC Stream Director
Enable pass to output F1:
To transmit Field 1Closed Caption data on the video output.
Enable pass to output F2:
To transmit Field 1 Closed Caption data on the video output.
Enable pass to output DTVCC:
To transmit DTV Closed Caption data on the video output.
VGA Monitoring
X/Y Decimation:
Set vertical and horizontal decimation of Preview Window. Use these parameters
with slow PC graphic card.
Analog Audio
Volume Left/Right:
Set audio volume of the Left/Right outputs.
