CONFIDENTIAL
– This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.
LW Player User Guide v2.6
page 61 / 70
Secondary Channel – SD-SDI Output
Use HD out resolution:
This parameter defines the relationship between the Primary HD
Channel and the Secondary SD Channel.
When ON and when the Primary Channel Output frame rate is set to 29,97; 30; 59,94; 60 fps,
then the Secondary Channel Output resolution is automatically set NTSC.
When ON and when the Primary Channel Output frame rate is set on 25; 50 fps, then
Secondary Channel Output resolution is automatically set PAL.
Monitor Type:
Available modes:
-
16x9
-
4x3
Out Resolution
: Specify the output resolution of the secondary video path. If “Use HD out
resolution” parameter is enabled then the “Out Resolution parameter” is not available. In this
case, HDM850 automatically sets resolution to PAL/NTSC depending on the Primary
Channel Output frame rate.
Use AFD
:
HDM board transmits AFD (Active Format Description) information, which is contained in
decoded MPEG file.
Audio embedded group
: Define the number of audio channel used on the Secondary
channel.
Automatic Detect Color Mode:
PlayerLW automatically sets the color mode for files and
output resolutions: ITU-R BT.709 for HD files, ITU Rec.601 for SD files and SD output
resolutions.
PlayerLW automatically adjusts color modes for files in playlist while decoding. If HD file is
played in SD output resolution, the PlayerLW sets ITU-R BT.709 for HD file and and ITU
Rec.601 for SD output resolution, the HD color scheme is converted to SD color scheme to
attainment SD color mode for transmitted data.
AES3 PCM Mode:
Available modes:
-
Consumer
-
Pro
AES3 NonPCM Mode:
Available modes:
-
IEC 61937
-
SMPTE337M
Color Adjustment
