CONFIDENTIAL
– This document is property of VITEC MULTIMEDIA, and may not be used or diffused to a third party without prior written approval.
LW Player User Guide v2.6
page 53 / 70
o
Only second field display
: Duplicates even lines
Play First Video Frame in Pause
:
Default Value is “ON”.
- ON - Player updates frame on seeking.
- OFF - Player holds one frame, which was got on PAUSE, while seeking. Paused frame is
held until press Play/Resume.
In trick mode assembly (Playback control assembly) this parameter always forced “ON”.
Play Audio for First Video Frame in Pause
:
- ON – HDM board plays a bit of audio, which belongs to seeked frame, when seek to a
frame happens.
- OFF – HDM board doesn’t play audio when seek to a frame happens.
In trick mode assembly (Playback control assembly) this parameter always forced “ON”.
Enable Default SDI Video Input:
-
ON - Keep showing SDI Input video when Player stops.
-
OFF – Stop SDI Input video when Player stops.
SDI-IN Audio Setting Mode:
-
Linear – set audio matrix in one to one mode. One input channel confront with one output
channel (direct matrix).
-
Copy PCIe Settings – copy settings of PCIe audio matrix to SDI input audio matrix
-
Zero – set all to zero
-
Custom – use custom audio matrix settings. Use “Embeded SDI, AES|EBU Audio Output”
for custom settings.
NonPCM Audio Mode:
HDM850 transmits non-PCM audio and data. The standard
accommodates multiple non-PCM audio and data formats that allow carriage of multiple
data streams within a single interface. SMPTE337M for outputting AC3 audio in
compressed format on the AES3 digital audio output
Available bitrate modes:
-
16 bit subframe 768kbps
-
20 bit subframe 960kbps
-
24 bit subframe 1152kbps
-
16 bit frame 1536kbps (Default)
-
20 bit frame 1920kbps
-
24 bit frame 2304kbps
Turn Off SDI-IN Audio for File Playback:
Automatically set audio matrix values to 0
when playing back of “SDI input” entry is finished.
End In Back:
- ON – shows black frame when decoding is stopped
- OFF – shows the last frame of video when decoding is stopped.
Embedded SD VBI Pass Mode:
Enable SDI Pass through mode for SD files (PAL 608 lines and NTSC 512 lines). Passing
through to Primary HD-SDI output is possible only if the HD-SDI output mode is Standard
Definition (PAL or NTSC). Enabling of “SD VBI Pass mode” turns on passing through to
Secondary SD-SDI output.
Active Video Lines Shift For NTSC:
