Vision 1330B, Руководство пользователя, Страница: 8 / 48

Úåå+)2!-%+å).#
System Operation
!2-).'
./2-!,å-%4(/$åå
This method is the typical way to arm the 1330B,
with the shock sensor enabled. Ensure that all
doors are closed and then press Button-I on the Pager
remote. After you press Button-I, the doors will lock
and hazard lights will flash once (if so installed). The
siren will chirp 1 time, the Pager remote will beep once and update (see
Fig-1 below), and Status LED will light solid for 5 seconds. Triggers (sen-
sor, door, etc.) are ignored for the first 3 seconds while the LED is lit solid.
(See “Error Chirp” on the next page.)
å
3),%.4å-/$%å-%4(/$åå
This method of arming will prevent the
siren from making any sound (no con-
firmation chirps, no warning chirps, no
siren blast, etc.). Press Pager Button II
then release. The doors will lock and hazard lights
will flash once (if so installed). The Pager will beep once and update (see
Fig-2 below), and Status LED will light solid for 5 seconds. Triggers (sen-
sor, door, etc.) are ignored for the first 3 seconds while the LED is lit solid.
(See “Error Chirp” on the next page.)
0USH
"UTTONå
I
$)3!2-%$ !2-%$
FIG-1: Pager LCD Icon Change After Arming
$)3!2-%$ !2-%$
FIG-2: Pager LCD Icon Change After “Silent Mode” Arming
0USH
"UTTONå
II
)#/.3
&,!3(
3,/7,9
)#/.3
&,!3(
3,/7,9