Vision 1330B, Руководство пользователя, Страница: 32 / 48

Úåå+)2!-%+å).#
Precautions & Safety
/0%2!4)/. Use of the 1330B outside its intended purpose as described
in this Installation Guide and the 1330B Owner’s Guide, could result in
damage to the vehicle or surrounding property, or cause serious injury or
even death. As the installer of this security system, it is your responsibil-
ity to ensure that the vehicle owner is properly informed of all the details of
your installation which are pertinent to safety.
3!&%49å0/).43å4/å!")$%å"9å
Never start the vehicle’s engine in enclosed spaces that lack adequate
ventilation. Extended exposure to carbon monoxide exhaust fumes
can result in death!
Do not disconnect the vehicle’s battery, as it could cause serious prob-
lems with airbag systems, anti-theft radios or vehicle diagnostics. If
you absolutely must disconnect the vehicle’s battery, first disconnect
the main power wiring harness of the 1330B and then disconnect the
vehicle’s battery.
Do not proceed with installing this system in vehicles that do not have
a 12-volt electrical system. This system will not function in 24-volt
trucks, and any damage resulting from such installation shall be the
sole responsibility of the installer.
Do not install the 1330B control module or associated sensors in or
near water, or in a location where water could gather. The 1330 is
not waterproof and an electrical short could occur if water gets in-
side. Only the siren can safely be installed in the engine compart-
ment.
Do not install the 1330B control module in an environment of in-
tense condensing humidity or steam, in an area with an unusally
large number of airborne particles, or any place where oil could build
up inside the control module case. All of these extreme environments
could lead to an electrical short and possible cause a fire.
Avoid installing the 1330B and its associated sensors near sources
of intense RF transmissions which could possibly interfere with the
operation of the system. If you find the system is randomly working
and not working, consider relocating the antenna unit and sensors.
1.
2.
3.
4.
5.
6.