Vision 1330B, Руководство пользователя, Страница: 12 / 48

Úåå+)2!-%+å).#
SYSTEM “ARMED” FEATURES
'7!å'ROUNDå7HENå!RMED
The 1330B feeds a (–) Ground output while the system is armed. Optional
components can be added to this control line, such as a Starter Kill Im-
mobilizer Relay or vehicle lighting devices. When the system is disarmed,
power to this output is removed and all attached devices shutdown. See the
Installation Guide for details on electrical specifications.
34!'%å3%.3/2å42)''%2
STå3TAGEåh7ARNINGå#HIRPSv åå
When the included shock sensor
detects a light impact to the vehicle body, the siren will chirp 5
times, the pager will beep and update icons as shown in Fig-5 be-
low. Note that any optional sensors attached to the shock sensor’s
1st Stage input can also trigger the 5 warning chirps. No siren chirps will
be produced while in Sensor Bypass Mode (or Silent Mode).
NDå3TAGEåh&ULLå3IRENv åå
When the included shock sensor de-
tects hard impact to the vehicle body, the siren will go off for 30
seconds (or until stopped by a button press on your pager remote),
and the pager will emit a siren tone and update icons as shown in
Fig-5 below. Note that any optional sensors attached to the shock sensor’s
2nd Stage input can also trigger the full siren blast sequence. The siren
will not be triggered while in Sensor Bypass Mode (or Silent Mode).
The system Status LED flashes slowly “once per second” while the system
is Armed, acting as a visual theft deterrent. The LED turns off when the
system is disarmed (unless the full siren blast had gone off).
34!453å,%$
FIG-5: Pager LCD Icon Change Upon Shock Detection
STå34!'%
)#/.3
&,!3(
2!0)$,9
NDå34!'%