Vision 1330B, Руководство пользователя, Страница: 37 / 48

6)3)/.å"å).34!,,!4)/.å'5)$%
THE 14-PIN MAIN HARNESS
This wire supplies (–) 0v ground (500mA max.) while the 1330B is armed.
This output is intended to be connected to the Yellow wire (“86”) of the op-
tional 896H-1B starter kill relay harness, as shown in Fig-1 below.
H1
( 9%,åWIREån å'7!åå3ILLå/UTPUT
4)0
You may also attach low-current devices, such as scanning LEDs, to
the YELLOW wire. These devices will turn on when the 1330 is armed. A
relay will be needed if your combined devices (including starter kill relay)
exceed 500mA.
("
2%,!9
)'.)4)/.
37)4#(
åååååå-!).
(!2.%33
A
STARTER
/&&
!##
/.
34
052
CUT
",5
9%, 9%,
H1
FIG-1: Starter Kill Wiring
This wire supplies a (–) 0v Ground (1.5A max.) output to operate the in-
cluded siren during a security breach. See Fig-2 below.
( /2'åWIREån å3IRENå/UTPUT
åååååå-!).
(!2.%33
H1
FIG-2: Connecting to the Siren
/2' /2'
"!44%29
"!#+50
3)2%.
",+
2%$
"2.
"!44%29
NC
å./4%
Ensure the siren key is turned to the red dot “Off”
position before connecting so the siren will not go off. Later,
remember to turn the siren key to the green “On” position.
2%$
'2.