Vision 1330B, Руководство пользователя, Страница: 17 / 48

6)3)/.å"å/7.%23å'5)$%
PROGRAM FEATURES EXPL AINED
When set to
/.
, vehicle lights will illuminate for safety while the Ignition
is turned on by a remote start system. (Only works if optional light flash is
installed, and only if 2EMOTEå3TARTå#OMPATIBILITYå-ODE is also turned /. .)
When set to
)'å0ROTECTå-ODE
, the system will trigger the siren when the
Ignition goes on while armed, as described on page 11 of this manual.
When set to
2EMOTEå3TARTå#OMPATIBILITYå-ODEå23#- , the system will by-
pass the Shock Sensor and Ignition triggers and IIP will become active
when IG goes on while armed, as described on page 11 of this manual.
)'å0ROTECTå-ODEåå2EMOTEå3TARTå#OMPATIBILITYå-ODE
6EHICLEå,IGHTSå/.å$URINGå2EMOTEå3TARTå
This feature automatically arms the system when you do the following:
(1) Turn IG on, (2) Turn IG off, (3) Open and Close any door. Upon seeing
these events, the system will arm 20 seconds after the last door is closed.
The doors will NOT be locked (so you won’t be locked out if you leave your
keys in the car by accident), but the system will be armed. Your 2-way
pager will NOT be updated that the system is now armed.
!UTOå!RM
After Arming, there is a default
åSEC
delay before the system will accept
alarm triggers (e.g., door, trunk, ignition, sensor). This delay is sufficient
to let the vehicle settle after you exit and close the door so the shock sensor
will not be triggered by residual vibration. You can change this delay to
åMIN for compatibility with vehicles that have long door lock pulses or
engine cooling fans. When set to “15 min.”, The Ignition and Door input
triggers will continue to activate 3 seconds after arming, but the Sensor
input will not activate until 15 minutes after arming.
%XITå$ELAYå4IMEå3ELECTION