Vision 1330B, Руководство пользователя, Страница: 21 / 48

6)3)/.å"å/7.%23å'5)$%
FORCE RESET
./4%3
The siren will go off for a full 30 seconds when you open the door
•
(un-
less the system was armed in Silent Mode) . If your 1330B system came
with a battery backup siren, you may use your siren key to disable the
siren temporarily to avoid disturbing the neighbors. When you open a
door, the system will trigger and the Status LED will flash rapidly. The
Status LED will then shut off when the system has been succesfully dis-
armed. DO NOT forget to re-enable the siren with your siren key after
the disarm sequence is complete.
If you enter an incorrect Force Reset Code, or if you fail to enter your
•
code within 30 seconds, the siren will shut off for 8 seconds and then
sound for another 30 seconds (because the door is open). You must try
to enter your Reset Code again during the next 30 seconds. If you fail
again, you must wait until the siren stops and starts again. DO NOT
CLOSE THE DOOR, or the siren will eventually stop and the system
will not recognize your Reset Code. You can close the door once you
have disarmed the system.
Don’t worry if the siren doesn’t stop immediately after you enter your
•
Reset Code. The system forces the siren to go off for the full 30 seconds
for security.