Vision 1330B, Руководство пользователя, Страница: 16 / 48

Úåå+)2!-%+å).#
FEATURE PROGRAMMING
To program features, have your vehicle’s key ready to turn the
ignition (IG) “on-and-off” several times. ( TIP: Use the “ACC” posi-
tion as IG “off” because its easier to switch.) Perform the following
3-step procedure to alter the features shown in Table-1 below:
Disarm 1. the system.
(Or “Arm-then-Disarm” if repeating this procedure.)
Turn 2. IG on-and-off the same number of times as the feature you wish to
program (refer to “No.” in Table-1 below), within 20 sec. of disarming .
(For example, if you want to change “Auto Arm,” you must turn the IG
on-and-off 8 times within 20 sec.)
Push 3. Button-I on the pager or transmitter. (Your chosen setting has
toggled. Vehicle hazard lights will then flash the same number of times
as the feature you just programmed.)
When the hazard lights finish flashing in Step-3 above, you may pro -
•
gram another feature by restarting this procedure at Step-1.
./4%3
(1) After you program a feature, vehicle lights will flash the same num -
ber of times as the feature you just programmed, but there will be no indication
of the “setting” you just toggled to—
simply test your 1330 system to confirm your
programming. (2) There is no “reset to factory default” feature.
4!",% &EATUREå3ELECTIONå-ENU
.O &EATUREå$ESCRIPTION 4OGGLEå3ETTINGS
)'å0ROTECTå-ODEåå2EMOTEå3TARTå#å-ODE
)'å0ROTECT
23#-
6EHICLEå,IGHTSå/.å$URINGå2EMOTEå3TART
/&&
/.
!UTOå!RM /&&
/.
%XITå$ELAYå4IMEå3ELECTION
åSEC
åMIN
!UTOå2EARM /&&
/.
))0å4RIGGERå3ELECTION
!LL
$OOR
0AGERåST3TAGEå4RIGGERå.OTIlCATION
/.
/&&
)GNITION#ONTROLLEDå$OORå,OCKING
/&&
/.
%XTERIORå)LLUMINATION
/&&
/.
4RANSMITTERå,EARNINGåå&ORCEå2ESETå#ODE
$EFAULTå2ESETå#ODEåå
&!#4/29å$%&!5,4å3%44).'3å3(/7.å).å"/,$å4%84å!"/6%