Vintage Revolution PedalPro, Руководство пользователя

Страница: 46 / 63

Post Effects
46
Rev. 2.0 - EN EU - fw 5.22
9
• To adjust the amount of wet signal on the left channel, press
EDIT
[
5
]. Use
the
arrow keys
[
3
] to position the blinking cursor next to WtL. Adjust the
value with the selection dial [ 4 ].
WtR
– Wet level, right return channel. Range: 0-100%.
The WtR (Wet right) parameter controls the amount of wet signal coming
from the external effect into the right channel, via the
AUX RETURN RIGHT
jack
[
16d
].
• To adjust the amount of wet signal on the right channel, press
EDIT
[
5
].
Use the
arrow keys
[
3
] to position the blinking cursor next to WtR. Adjust
the value with the selection dial [ 4 ].
TIPS & TRICKS - AUX MIXER
• If your external effect is a digital effect,
do not use
its internal mixer
to mix the signal coming from the PedalPro (the “dry” signal) and the
digitally-processed signal. Use instead the high quality AUX Mixer to
mix the dry signal with the wet signal coming from your external digital
effects. In this way the dry signal will bypass the digital effect conserv-
ing the crystal clear characteristic typical of the PedalPro
• Remember that the parameters on the Ext/AUX loops menu pages 1/2
and 2/2 , including the AUX Mixer parameters, are preset parameters
and not global parameters. That is, they can be saved as part of a
preset and they can be defined differently on different presets. This
enables you to use your external effects either in combination with the
PedalPro effects, or on their own by simply creating a preset in which
all PedalPro’s on-board effects are bypassed and only the Ext and/or
AUX loops are activated.
• You may keep your external effects always on. For each preset, the
PedalPro will bypass them or activate them according to the preset
parameters defined on Ext/AUX loops menu pages
1/2 and 2/2 .