Vintage Revolution PedalPro, Руководство пользователя

Страница: 37 / 63

Rev. 2.0 - EN EU - fw 5.22
37
Post Effects
9
9.4 POST EFFECTS
The post effects include all the BBD based effects like chorus, flanger and
delay and post loops (AUX SEND/RETURN).
All post effects are entirely analogue and designed using the most ad-
vanced analogue components, ensuring an unbeatable sound quality. Plus,
with an expression pedal connected to the Pedalino™ Foot Controller, you
can control - while you play - fundamental parameters including the Wet/Dry
ratio, the Delay time, the Delay feedback delay, the Flanger feedback and
many more (see the special section ‘ADES - An In-depth Look’, on page 48).
For those who need to add an external stereo digital effect or two extra
analogue pedals at the end of the effect chain (just before volume con-
trol and noise gate) the PedalPro features a set of stereo AUX send/return
connectors. If you use a digital external processor, the internal preamplifiers
and mixers will allow to match the signal dynamic of your external effect up
to +7dBu and to benefit of a full analog path of your unprocessed signal. In
this way, with the mixing ratio under your control, the analogue quality and
harmonic richness of your sound is always preserved.
The post effects include the following effects/modules:
1. Chorus;
2. Flanger;
3. Chorus and Vibe;
4. Delay with left/right routing options;
5. De-tuner for modulating the delay;
6. Auxiliary (AUX) mixer, providing additional loop options.
noise
gate
LEFT
RIGHT
OUTPUT
LEFT
(mono)
OUTPUT
RIGHT
buffer compressor
envelope
detector
envelope
detector
external
pedal
pre-amp distortion
panner /
tremolo
phaser
noise
gate
filter F1
IN
filter F2
volume
control
volume
control
post
effects L
post
effects R
The post effects of your PedalPro are at the end of the PedalPro’s effect
chain, just before stereo volume controls and noise gates.
POST EFFECTS ROUTING OPTIONS
The following routing configurations are available for the effects of the ex-
pansion board. The routing can be changed by accessing the Delay con-
figuration menu (see section below).
aux
right
LEFT
RIGHT
chorus / flanger
or chorus&vibe
aux
left
delay
post
effects L
post
effects R
=
aux
right
LEFT
RIGHT
chorus / flanger
or chorus&vibe
aux
left
delay
post
effects L
post
effects R
=
Fig. 9-2. Post effects with the delay on the left channel.
Fig. 9-3.
Post effects with the delay on the right channel.
È3/4
Play: 0Ç 0 0
C Fl h Dl y
P s rePh u a er
Working with your post effects
The Chorus, Flanger and Delay configuration menus are accessible from
page 3 of the main menu, where two options are available: ‘
ChFl
’ and ‘
Dly
’.