Vintage Revolution PedalPro, Руководство пользователя

Страница: 45 / 63

Post Effects
45
Rev. 2.0 - EN EU - fw 5.22
9
external
stereo
effect
LEFT CHANNEL
RIGHT CHANNEL
AUX SEND
LEFT
AUX RETURN
LEFT
gain L
AUX SEND
RIGHT
gain R
AUX RETURN
RIGHT
+
wet L
dry L
+
wet R
dry R
in R
in L
out R
out L
Fig. 9-11.
Aux type: Aux + Mixer
When the
Aux type
is set to be one of the following configurations:
‘LoopL>OutL’, ‘LoopR>OutR’, ‘LoopL&R>Out’, then the
AUX SEND/RETURN
jacks [
16a
to
16d
] operate at instrument level.
If
Aux type
is set to ‘AUX+ Mixer’ the
AUX SEND/RETURN
jacks [
16a
to
16d
]
operate at up to +7dBu (line level). To accommodate DSP units operating
at st4dBu the send signal levels can be individually adjusted using
parameters
GsL , GsR (gain send level Left/Right ). Using the parameter WtL
and WtR (Wet Left/Right) the return signal levels are individually readjusted to
instrument level and mixed with the analog signals by means of the DrL , DrR
(Dry level Left/Right) parameters. GsL , GsR , WtL , WtR , DrL , DrR and Aux type
parameters are part of your preset definition and therefore are saved in the
preset (see next section).
When
Aux type
is selected to ‘none’ all the effects connected to the
AUX
SEND/RETURN
jacks [
16a
to
16d
] are true bypassed.
PAGE 2/2 - AUX MIXER
When the loop routing parameter
Aux type
on page 1/2 is set to ‘Aux +
Mixer’, you can adjust on this page the settings of the auxiliary mixer, so as to
change how the sound of your PedalPro is blended with that of your external
(stereo) effect.
Fig. 9-11 should help identifying the AUX mixer’s parameters
and their effect on the sound chain.
2/2 A x u m È
WtL: 0 0. tR: 5 2 0 . 5
Dr L: 01 5. r R: 0 1 0 . 2 1
0 W
D
i e x r
GsL: 030. sR: 0 3 0 . 1 1 G
5
GsL – Gain level, send left channel. Range: 0-100%.
The GsL (Gain send left) parameter controls the level of gain applied to the
signal sent to the external effect via the
AUX SEND LEFT
jack [
16a
].
• To adjust the amount of gain on the left send channel, press
EDIT
[
5
]. Use
the
arrow keys
[
3
] to position the blinking cursor next to GsL. Adjust the
value with the
selection dial
[
4
].
GsR – Gain level, send right channel. Range: 0-100%.
The GsL (Gain send right) parameter controls the level of gain applied to the
signal sent to the external effect via the
AUX SEND RIGHT jack [ 16b ].
• To adjust the amount of gain on the right send channel, press
EDIT
[
5
].
Use the
arrow keys
[
3
] to position the blinking cursor next to GsR. Adjust
the value with the
selection dial
[
4
].
DrL – Dry level, left channel. Range: 0-100%.
The DrL (Dry left) parameter controls the amount of dry signal that is bypass-
ing the external effect on the left channel.
• To adjust the amount of dry signal on the left channel, press
EDIT
[
5
]. Use
the
arrow keys
[
3
] to position the blinking cursor next to DrL. Adjust the
value with the
selection dial
[
4
].
DrR – Dry level, right channel. Range: 0-100%.
The DrR (Dry right) parameter controls the amount of dry signal that is bypass-
ing the external effect on the right channel.
• To adjust the amount of dry signal on the right channel, press
EDIT
[
5
]. Use
the
arrow keys
[
3
] to position the blinking cursor next to DrR. Adjust the
value with the
selection dial
[
4
].
WtL
– Wet level, left return channel. Range: 0-100%.
The WtL (Wet left) parameter controls the amount of wet signal coming from
the external effect into the left channel, via the
AUX RETURN LEFT jack [ 16c ].