Post Effects
40
Rev. 2.0 - EN EU - fw 5.22
9
PAGE 4/4 - FLANGER CONFIGURATION
To add the Flanger of the Expansion Board to your effect chain, set the pa-
rameter
Type
on page
1/4
to either ‘flanger’. Adjust the Flanger settings on
page 4/4.
Tempo: 1 5 .
Wv:
c
e
r
t
0 3
4/4
F a
l
H
n e
g
ar Ç Á
È
Regen: 05 .
Mn:
0
3
0
.
0 1
Depth: 06 .
Wt:
0
3
0
.
8 2
1
r
m
5
Harm
– Harmonics selector Range: even harmonics (
Á
), odd harmonics (
Â
)
This switch allows you to select whether to use even or odd harmonics to cre-
ate the flanging effect (see Tips&Tricks box in this page).
•
Press the
PARAM. SWITCH
key [
10d
] to select the even harmonics (
Á
) or
the odd harmonics off (
Â
).
Tempo
– Speed of the Flanger modulator. Range: 3 BPM (20 sec) - 550 BPM
(9.16 Hz)
•
To adjust the Tempo (speed) of the Flanger modulating waveform, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to
Tempo. Adjust the value with the
selection dial
[
4
].
Regen
– Flanger feedback control. Range: 0-100%
The Regen parameter controls the amount of signal that is fed back into the
Flanger effect.
•
To change the Regen level of the Flanger, press
EDIT
[
5
]. Use the
arrow
keys
[
3
] to position the blinking cursor next to Regen. Adjust the value
with the
selection dial
[
4
].
Depth
– Depth of the Flanger modulation. Range: 0-100%
•
To alter the depth of the Flanger, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to
position the blinking cursor next to Depth. Adjust the value with the
selec-
tion dial
[
4
].
Wv
– Modulating waveform. Range: sine, trig, trap, rect, expo, shl1, shl2
The modulating waveform parameter allows you to select from among the
Boost
– Range: on (
Á
), off (
Â
)
•
Press the
PARAM. SWITCH
key [
10b
] to turn the Boost on (
Á
) or off (
Â
).
Tempo
– Speed of the Vibe modulator. Range: 3 BPM (20 sec) - 550 BPM (9.16
Hz)
•
To change the Tempo of the Vibe modulating waveform, press
EDIT
[
5
].
Use the
arrow keys
[
3
] to position the blinking cursor next to Tempo. Ad-
just the value with the
selection dial
[
4
].
Depth
– Depth of the Vibe modulation. Range: 0-100%
•
To alter the depth of the Vibe effect, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to Depth. Adjust the value with the
selection dial
[
4
].
Ph
– Phase of the Vibe modulator
.
Range: 0°, 90°, 180°, 270°
The phase of the modulator controls the phase of the modulating waveform.
It is used to control the relative phase among effects that offer the possibil-
ity of selecting the Phase of the Modulator (Ph), e.g., the Tremolo/Panner,
Phaser, Auto Filters. This parameter is particularly useful when the
Vibe is used
in combination with the Chorus
, as it gives you the option to synchronise their
tempos.
•
To change the phase of the Vibe modulator, press
EDIT
[
5
]. Use the
arrow
keys
[
3
] to position the blinking cursor next to Ph. Adjust the value with
the
selection dial
[
4
].
Wv
– Modulating waveform. Range: sine, trig, trap, rect, expo, shl1, shl2
The modulating waveform parameter allows you to select from among the
available modulating waveforms. All the classic waveforms are included,
along with some exclusive, VR-designed waveforms. Available waveforms
include: sine, triangle, trapeze, rectangle, and shlf (shelf) (see
Appendix A
for
more details on the modulating waves).
•
To change or select a modulating waveform for the Vibe, press
EDIT
[
5
].
Use the
arrow keys
[
3
] to position the blinking cursor next to Wv. Adjust
the value with the
selection dial
[
4
].
Содержание PedalPro
Страница 59: ...59 Rev 2 0 EN EU fw 5 22 13 Technical Specs ...
