Post Effects
43
Rev. 2.0 - EN EU - fw 5.22
Fbk
– Feedback control. Range: 0-100%
The Fbk parameter controls the amount of delayed signal that is fed back
into the Delay effect.
•
To change the feedback level of the Delay, press
EDIT
[
5
]. Use the
arrow
keys
[
3
] to position the blinking cursor next to Fbk. Adjust the value with
the
selection dial
[
4
].
PAGE 3/3 - DETUNER CONFIGURATION
By modulating the clock of the BBD delay stages, you can produce a shim-
mering delay that simulates vintage tape delays. To use this feature you must
first configure the Delay using the parameters on page
1/3
and page
2/3
,
and then activate and adjust the Detuner on page 3/3.
Speed: 02 .
0 0
3/3
D t
e u e
n
Ç Á
È
Depth: 01 .
8 8
r
Detuner
– Range: on (
Á
), off (
Â
)
•
When on this page, press the
BYPASS EFFECT 1
key [
10a
] to switch the
Delay Detuner on (
Á
) or off (
Â
).
Speed
– Speed of the Detuner. Range: 0-100%
•
To change the speed of the Detuner, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to Speed. Adjust the value with the
selection dial
[
4
].
Depth
– Depth of the Detuner modulation. Range: 0-100%
•
To alter the depth of the Detuner effect, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to Depth. Adjust the value with the
selection dial
[
4
].
9.4.3 AUX Connections (Post-loop)
On
page 2
of the main menu the user can access the configuration for the
external effects loop (pre-loop, see
section 7.6
, on page 10) or the AUX
loop (post-loop).
The
AUX SEND
and
AUX RETURN
[
16a
to
16d
] jack connectors can be used
for connecting either up to two external stomp box pedals (see
Fig. 9-8
,
Fig.
9-9
, and
Fig. 9-10
) or a DSP effect unit (see
Fig. 9-11
) at the end of the audio
chain before the Noise gate and the Volume controls.
Like in the pre-loop, the post-loop connections are controlled by internal
relays that electrically connect and disconnect the external effects to your
post-loops according to the
Aux type
parameter which is part of your sound
preset definition. Therefore in one sound preset your external effect may be
part of your sound effect chain, while in an other sound preset your external
effect is true bypassed.
ACCESSING POST LOOP OPTIONS
•
On
page 2
of the main menu, press the
multifunction key
[
10d
] labelled
‘
Ext
’.
È2/4
Pl ay:
0Ç
0
0
P as
h
Fl tr Lev
r
Ext
l
P
s
rePh
u
a er
Page 1/2
(Ext. effects, AUX type) activates and selects the post-loop routing.
Page 2/2
(AUX mixer) defines the settings for the auxiliary mixer*.
•
To switch between the two pages of the External Effects and AUX Mixer
loops configuration menu, press
Page -
[
11
] or
Page +
[
12
].
*
Aux_type
on page 1/2 must be set to ‘Aux + Mixer’ in order to activate the auxiliary mixer.
9
Содержание PedalPro
Страница 59: ...59 Rev 2 0 EN EU fw 5 22 13 Technical Specs ...
