Termoscanner
67
EN
1 - Select the sensor ID, click “Enable” and set the alarm type, alarm holding time and sensor name.
2 - Set alarm trigger options. The setup steps are the same astemperature measurement settings. Please refer to temperature measurement settings
chapter for details.
- Click “Save” button to save the settings.
4 - Set the schedule of the sensor alarm. The setup steps of the schedule are the same as the schedule recording setup. (See Schedule Recording).
Click “Apply settings to” to quickly apply the settings to the other alarm input.
6.3.7
-
Alarm Out
Go to Config
Alarm
Alarm Out.
Alarm Out ID
: Select the alarm out ID.
Alarm Out Mode
: Alarm linkage, manual operation, day/night switch linkage and timing are optional.
Alarm Linkage
: Having selected this mode, select alarm out name, alarm holding time at the “Alarm Holding Time” pull down list box and alarm type.
Manual Operation
: Having selected this mode, select the alarm type and click “Open” to trigger the alarm out immediately; click “Close” to stop alarm.
Timing
: Select the alarm type. Then click “Add” and drag the mouse on the timeline to set the schedule of alarm out; click “Erase” and drag the mouse
on the timeline to erase the set time schedule. After this schedule is saved, the alarm out will be triggered in the specified time.
