Termoscanner
74
EN
3 - Input old password of this user in the “Password” text box.
4 - Input new password in the “New password” and “Confirm Password” text box.
5 - Input computer’s MAC address as required.
6 - Click “OK” button to modify user’s password.
Note
: To change the access level of a user, the user must be deleted and added again with the new access level.
Delete user:
1 - Select the user you want to delete in the user configuration list box.
2 - Click “Delete” button to delete the user.
Note:
The default super administrator cannot be deleted.
6.5.2 - Online User
Go to Config
Security
Online Video User. You can view the user who is viewing the live video.
An administrator user can kick out all the other users (including other administrators).
6.5.3 - Block and Allow List
Go to Config
Security
Block and Allow Lists.
Setting steps are as follows:
Check “Enable IP address filtering” check box.
Select “Block the following IP address”, input IP address in the IP address list box and click “Add” button. The operation step of “Allow the following IP
address” and MAC address filter settings are the same with “Block the following IP address”.
After you set the IP address or MAC address, the system will block or allow the user using the added IP address or MAC address to access the device.
6.5.4
-
Security Management
Go to Config
Security
Security Management as shown below.
In order to prevent against malicious password unlocking, “locking once illegal login” function can be enabled here. If this function is enabled, login fail
-
ure after trying six times will make the login interface locked. The camera can be logged in again after a half hour or after the camera reboots.