Termoscanner
64
EN
6.2.4
-
Screen Brightness
Note: To set parameter via the terminal, please tap Touch screen Main Menu
System Settings
Local Config
Click Config
Image
Screen Brightness to go to the following interface.
In this interface, you can set the brightness of the screen of the terminal. The adjustable range is from 150 to 255.
6.2.5
-
White Light Control
Click Config
Image
White Light Control to go to the following interface.
White Light Mode
: “OFF”, “Manual” or “Auto” is optional. In low illumination condition, this mode can be enabled.
6.2.6
-
Face Exposure
This function allows you to adjust the exposure of the face image in the camera view.
To enable and set face exposure, please go to Config
Image
Face Exposure interface.
When the brightness of the captured face is not enough, it can be enabled.
6.3 - Alarm Configuration
6.3.1
-
Exception Detection
This function can detect changes in the surveillance environment affected by the external factors.
To set exception detection:
Go to Config
Alarm
Exception interface as shown below.
