Termoscanner
69
EN
6.4.4 - DDNS Configuration
If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1 - Go to Config
Network
DDNS
2 - Apply for a domain name. Take www. dvrdyndns.com for example. Input www.dvrdydns.com in the IE address bar to visit its website. Then click “Reg
-
istration” button
Create domain name
After you successfully request your domain name, you will see your domain in the list.
3 - Input the username, password, domain you apply for in the DDNS configuration interface.
4 - Click “Save” button to save the settings.
1 - Check “Enable”.
2 - Check the IP address and port of the transfer media server in the CVM ELVOX. Then enable the auto report in the CVM ELVOX when adding a new
device in the CVM ELVOX. Next, input the remaining information of the device. After that, the system will auto allot a device ID. Please check it in the
CVM ELVOX.
3. Input the above-mentioned server address, server port and device ID in the responding boxes. Click “Save” button to save the settings.
