Termoscanner
71
EN
6.4.7 - Mail configuration
If you need to trigger E-mail when an alarm happens or IP address is changed, please set the E-mail here first.
Go to Config
Network
Email.
Sender Address: sender’s e-mail address;
User name and password: sender’s user name and password;
SMTP Address: The SMTP IP address or host name.
Select the secure connection type at the Secure Connection pull down list according to user’ actual needs;
SMTP Port: The SMTP port.
Send Intervals: Set it as needed.
For example, if it is set to 60 seconds and multiple motion detection alarms are triggered within 60 seconds, they will be considered as only one alarm event
and only one email will be sent. If one motion alarm event is triggered and then another motion detection alarm event is triggered after 60 seconds,two
emails will be sent. When different alarms are triggered at the same time, multiple emails will be sent separately.
Click “Test Account Setting” to test the effectiveness of the account.
Receiver email address: receiver’s e-mail address;
6.4.8 - FTP Setting
After you set the FTP server, the captured pictures on an alarm will be uploaded to the FTP server.
Go to Config
Network
FTP.
To Add FTP
Server Name: The name of the FTP.
Server Address: The IP address or domain name of the FTP.
Upload Path: The path of uploading the files.
Port: The port of the FTP.
Use Name and Password: The username and password are used to login the FTP.
