Termoscanner
49
EN
2. Enable“Save Source Information” or “Save Face Information”. Save Source Information: if checked, the whole picture will be saved to the SD card
when detecting a face. Save Face Information: if checked, the captured face picture will be saved to the SD card when detecting a face.
Note: To save images to the local PC, please enable the local smart snapshot storage first (Config
System
Local Config). To save images to
the SD card, please install an SD card first.
3 -Set snapshot interval.If 5 seconds is selected, the camera will capture the same target once every 5 seconds during its continuous tracking period.
4. Set alarm holding time and alarm trigger options.
Deduplication Period
: In the set period, delete the repeated comparison results.
Similarity threshold
: When the similarity of the captured face picture and the face picture added into the face database exceeds the similarity thresh
-
old, alarms will be triggered.
Send the face comparison data
: if it is disabled, the face comparison result will be displayed neither on the screen of the terminal nor on the live inter
-
face of the web client.
The face acquisition area (min and max percentage) can be set in the dedicated menu.
3.3 - Face Database Management
In the live interface of Web Client, click Config
Face
Face Database Management. This will enter the following interface.
