ViewZ IP-PVM-N Series Скачать руководство пользователя

Страница: 35 / 120

User Manual

Visit the ViewZ USA website at https://www.viewzusa.com

Overview

CONFIG. /INTELLIGENT ANALYSIS

Terminology

Operating Environment

Precautions

•

Field of View: the whole screen that a camera is capable of displaying.

•

Deployment Area: the still area with any shape in the field of view set by a user.

•

Target: the moving object of a certain type (human, vehicle, human or vehicle) appearing in the field of

view.

•

False Alarm: a false alarm generated because of interference sources (such as illumination change, leaf

waggle and shadow).

•

Alarm missing: an alarm meeting user-defined target trigger settings but not alarm.

•

Intelligent analysis available only on Hisilicon currently

•

Operating system: Microsoft Windows 7/Windows XP (32/64-bit operating system supported)

•

CPU: Intel core i3 and above / Memory: 1 GB and above / Display: resolution 1024*768 or above

Precautions for Installation

•

The camera stays level with the horizon, without inclination.

•

The installation height is more than 2 m indoors and within 5-8 m outdoors. If climbing over the wall needs

to be monitored, the camera height can be 2 m higher than the wall.

•

The angle of depression is larger than 150 & Do not install the device against the light.

•

Try to install the device in a place where the light reflection from ground is weak in case of indoor

installation.

•

Try to keep the sky out of the field of view, because false alarms may be generated due to illumination

changes or cloud movement.

Other Precautions

•

Try to disable automatic white balance, the switch of which tends to cause alarm missing.

•

Set the camera to be fixed focus.

•

Do not switch from color mode to black&white mode frequently, otherwise, alarm missing occurs.

•

Try not to use the Infrared all-in-one machine outdoors, which attracts insects and causes false alarms.

•

The target cannot be oversized or undersized. The minimum target detectability is 8*8 pixels. The target

takes up 1/20-1/2 of the screen in height, excess of which leads to alarm missing.

• T

he background modeling after parameter setting needs 4-8 seconds, during which a triggered alarm is not reported.

•

A certain period of time is required from target appearance to recognition, so the duration of a target

appearing in the field of view normally needs to be more than 2 seconds.

•

Avoid too many moving targets in the field of view, which may lead to alarm missing.

•

The fill-in light at night needs to be uniform.

•

The wide-angle lens with short focal length (less than 4 mm) is recommended for small indoor space.

Note :

The software does not support pure 64-bit system. The 64-bit system mentioned above supports 32-bit

software.

Содержание IP-PVM-N Series

























































































































Результаты поиска

Содержание IP-PVM-N Series

Отзывы:

Похожие инструкции для IP-PVM-N Series

Бренды по названию

Популярные бренды

ViewZ IP-PVM-N Series, Руководство пользователя

Результаты поиска

Содержание IP-PVM-N Series

Отзывы:

Похожие инструкции для IP-PVM-N Series

Бренды по названию

Популярные бренды