22
User Manual
Visit the ViewZ USA website at https://www.viewzusa.com
CONFIGURATION / DEVICE
1. Setup Local Network Parameters
Procedure
IP Protocol
DHCP IP
IP Address
Subnet Mask
Default Gateway
Preferred DNS Server
Alternate DNS Server
[Default value]
IPv4
Setting
Parameter
DESCRIPTION
Table 5-1 Local network parameters
Obtain IP address
automatically
MTU
Click the button on to enable
obtaining
IP address automatically
from the drop-down list box.
[Default value]
192.168.0.120
[Default value]
255.255.255.0
[Default value]
192.168.0.1
[Default value]
192.168.0.1
[Default value]
192.168.0.2
[Setting method]
[Setting method]
Select a value
[Setting method]
Enter a value manually.
N/A
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
The device automatically obtains the IP address from
the DHCP server.
Set the maximum value of network transmission
data packets.
IPv4 is the IP protocol that uses an address length of
32 bits.
IP address that the DHCP server assigns to the device.
Device IP address that can be set as required.
Subnet mask of the network adapter.
This parameter must be set if the client accesses the
IP address of a DNS server.
IP address of a domain server.
If the preferred DNS server is faulty, the device uses
the alternate DNS server to resolve domain names.
device through a gateway.
Step 2
Set the parameters according to Table 5-1.
NOTE :
To query the current
NOTE
The MTU value ranges from
IP address of the device, you must
800 to 1500, with the default value at 1500.
query it on the platform based on the
Please do not change it arbitrarily.
device name.
