79
User Manual
Visit the ViewZ USA website at https://www.viewzusa.com
12. Advanced
CONFIG. /INTELLIGENT ANALYSIS
Settings
Setting methods and rules
Scene
ID
Real Size in
scene (cm)
drop-down list.
drop-down list.
Enter a value in the area box.
[Default Value]
0
[How to set]
Select from the
[How to set]
Select from the
[How to set]
[Default Value]
Outdoor
outdoor base on the Environment.
The scene which camera installed Select indoor/
Length of line according to the real size in scene.
The default value is 0 and the setting value is
0-99999 centimeters.
Setting
Parameter
DESCRIPTION
Table 6-12 Advanced Parameter Description
according line by the ID.
Mark the line base on the ID of line, select the
Set Advanced parameters before setting function parameters. Draw lines in advanced parameters interface so
that the true object has a mapping relation with the image object. The method and rules for drawing line as
below:
•
2-4 vertical lines or 2 vertical lines and 2 ground lines need to be entered.
•
In the case of low marking requirement, two vertical lines can meet most scene requirements. Normally,
the vertical line is marked based on human height.
•
The lines are distributed near and far. Two vertical lines are in the scene, one near and the other far. On
the screen, draw a vertical line along the target object height, measure the actual length of this target, and
enter the actual length in Real size in Scene box for saving. Similarly, two horizontal lines on the ground are
in the scene, one near and the other far. Measure and enter the actual length.
•
Click a marking line (turning red after clicking) and click Delete to delete the markning line.
•
Click a marking line (turning red after clicking), to modify the markinng line data. You can also modify the
line parameters by selecting a number and enter the actual size in Real size in Scene box on the advanced
parameter interface
