65
User Manual
Visit the ViewZ USA website at https://www.viewzusa.com
8. Abnormal Speed
CONFIG. /INTELLIGENT ANALYSIS
Settings
Alarm Interval
Limit Target Type
Limit Target Size
Minimum
(Maximum) Speed
(m/s)
(1-1800s)
Enter a value in the area box.
Click to enable Limit Target Type.
Click to enable Limit Target Size.
Enter a value in the area box.
[Default Value]
Off
[Default Value]
Off
[How to set]
[How to set]
[How to set]
[How to set]
[Default Value]
10
target of specified type meets the alarm condition, it
is generated again in next intervals (alarm interval)
until the end of event.
Setting range: 1-1,800 seconds.
An alarm is generated when the travel speed of a
The target size for triggering an effective alarm is set
Set prohibited speeds. When a target object crosses
is 0-1000000 square centimeters. When setting the
may be generated.
based on the actual target size. The default value is
an area at a speed between the minimum and
maximum speeds, an alarm is generated.
Setting range: 5-60 seconds.
target size, you need to accurately set ”Real size in
1000-100000 square centimeters and the setting range
scene” in advanced parameters, otherwise no alarms
Setting
Parameter
DESCRIPTION
Table 6-8 Abnormal Speed Parameter Description
options of human, vehicle, or both. When the device is
used indoors, because of small space and large targets,
alarms are triggered by human sometimes even if
vehicle is selected, leading to false alarms. It is
recommended to set the target type to human for
indoor use.
Effective alarms are set based on target type, with
