Viessmann VITOPEND 200, Инструкции по установке и обслуживанию для подрядчиков

Страница: 98 / 132

Control and display elements
A Pressure gauge
B Fault indicator (red)
C Optolink interface
only in conjunction with the diag-
nostic adaptor (accessory) and
Vitosoft (accessory)
D ON indicator (green)
E Reset button
F User interface
G ON/OFF switch
Keys at the user interface:
O Set boiler water tempera-
ture
F Set DHW temperature
O + F Emissions test function
K Standby mode
L DHW only
G Heating and DHW
/ Comfort mode
b / a Setting values
d Confirmation
c Information
e Standard settings (Reset)
Heating mode
The set boiler water temperature will
be maintained in the "Heating and
DHW" program if a demand is raised
by the room thermostat.
The boiler water temperature will be
maintained at the default frost protec-
tion temperature when there is no
demand. The electronic temperature limiter
inside the burner control unit limits the
boiler water temperature to 85 °C.
Flow temperature setting range: 40 to
76 °C
Constant temperature control unit
98
Function description
5592
817
GB