Intended use
6
Installation instructions
VITOBLOC 200 EM-530/660
version
SCR
58
41436
GB
2
Intended use
The operator of the Vitobloc 200 EM-530/660 CHP
unit (versions SCR and SCR-ready) must observe the
relevant country-specific laws and regulations.
Target group
This document is intended solely for use by
contractors; see chapter 3.3 Personnel.
Application
The Vitobloc 200 EM-530/660 CHP unit (versions
SCR and SCR-ready) is intended exclusively for the
generation of three-phase current 400 V, 50 Hz and
DHW in natural gas mode.
It is only intended for industrial and commercial
applications.
Any use that differs from or goes beyond this is
considered inappropriate. The manufacturer rejects all
liability for any losses arising from such inappropriate
use. The operator alone bears the associated risks.
Intended use also includes observance of these
instructions and compliance with the inspection and
servicing conditions.
Incorrect use
All applications deviating from the intended use are
deemed to be impermissible incorrect use. This
includes:
●
Application areas not listed under "Application".
●
Use of operating fluids that do not correspond to
the manufacturer's specifications.
●
Use outside the permissible technical operating
limits.
●
Use in areas at risk of explosion.
●
Use outdoors.
●
Bypassing of safety equipment.
●
Operation as an emergency generator.
●
Operation in permanent island mode.
●
Use only for heat generation if power is not drawn
off simultaneously.
●
Siting in the same room as a boiler system with
atmospheric burner or an NH
3
refrigeration unit
with an interconnected air supply.
EC Declaration of Conformity and Declaration of
Incorporation
This CHP unit is considered a complete machine as
referred to in the EC Machinery Directive.
The machine complies with the EC Machinery
Directive. This has been established by means of a
conformity assessment process.
Declaration of Conformity
The Declaration of Conformity is the basis for the
system's CE designation. The CHP unit may only be
operated in accordance with country-specific
legislation, regulations and standards.
The controller has a CE designation in accordance
with the EMC Directive and the Low Voltage Directive.
