Safety
VITOBLOC 200 EM-530/660
version
SCR
Installation instructions
13
5
8
41436
GB
3.6.8 Electrical energy/equipment
DANGER
Live components!
Death by electrocution on contact
Only trained, authorised, specialist
personnel may perform work on the
machine.
Observe the safety instructions listed
in the machine.
Isolate the machine from its power
supply before commencing electrical
work.
Five safety rules specified in standard
series DIN VDE 0105 must be
observed!
DANGER
Incorrect fuses!
Increased risk of fire due to
incorrect or incorrectly installed
fuses
► Insert fuses without using any
force. Position the fuse correctly.
► Only use structurally identical types
with the specified response
characteristics.
PLEASE NOTE
Installation or repair work performed
incorrectly!
Serious material damage to the
machine and its surroundings
Only have service and repair work
carried out by authorised technical
personnel.
Only use the original components
permitted by the manufacturer.
Observe all safety instructions and
hazard warnings.
●
Only equip and operate the machine with products
permitted by the manufacturer.
●
Only use original fuses/MCBs with the prescribed
current strengths! Shut down the machine
immediately in the event of faults in the power
supply!
●
Observe all safety instructions and hazard
warnings on the electrical equipment!
●
Installation work on electrical equipment or
operating materials may only be carried out by a
qualified electrician or trained personnel under the
supervision and guidance of an electrician, in
accordance with the electrical regulations.
●
All work on live parts is prohibited!
