Commissioning, control, operation, service, maintenance
VITOBLOC 200 EM-530/660
version
SCR
Installation instructions
31
5
8
41436
GB
7
Commissioning
DANGER
Incorrect handling during
commissioning!
Risk to life, serious personal injury
resulting in irreversible damage
Commissioning may only be
performed by personnel trained by the
manufacturer.
Observe safety regulations.
WARNING
Failure to observe commissioning
specifications!
Serious material damage to the
machine and its surroundings
Observe commissioning specifications.
●
Commissioning by our in-house customer service
department must be applied for with the "Notice of
readiness for commissioning"
(www.bhkw.de/downloads) in good time, at least
4 weeks before the requested date.
Page 1 of the commissioning notice can be sent in
advance to make a provisional appointment.
●
Commissioning of the Vitobloc 200 EM-530/660
CHP unit (versions SCR and SCR-ready) may only
be performed by the manufacturer Viessmann or a
contractor authorised by Viessmann Werke GmbH &
Co. KG with personnel trained and authorised
specifically for this task.
Observe the accident prevention regulations!
●
Inspection of the installation and commissioning
may only performed by authorised personnel.
8
Control and operation
The machine must be controlled and operated in
accordance with the operating instructions for the
Vitobloc 200 EM-530/660 CHP unit (versions SCR
and SCR-ready).
9
Information regarding
service and maintenance
Service and maintenance work must always be
carried out by authorised service personnel in
accordance with the manufacturer's service list.
The service list is maintained as a binding
verification document and the original must be
retained by the operator.
●
The gaseous fuel must meet the minimum quality
requirements stipulated in the specifications. Only
use operating fluids that comply with the regulations,
as otherwise the manufacturer's liability for material
defects is invalidated!
