manualshive.com logo in svg

VideoRay Defender MSS, Руководство оператора


Поделиться
Скачать
background image

Use

Press and hold the Tilt Up button to tilt the front camera up. Release the button when the camera has
tilted to the desired setting or has reached the end of its range.

 You should not continue to hold either tilt button when the camera has reached the end of its tilt

range.

Camera Tilt Up

Camera Tilt Down

The Camera Tilt Up button increases the vertical angle of the front camera in the downward direction.

Button Locations and Labels

    Tilt Down    

Use

Press and hold the Tilt Down button to tilt the front camera down. Release the button when the camera
has tilted to the desired setting or has reached the end of its range.

 You should not continue to hold either tilt button when the camera has reached the end of its tilt

range.

Camera Tilt Down

Camera Focus In

The Camera Focus In button adjusts the focus of the front camera for near objects.

Button Location and Label

    Focus In    

Содержание Defender MSS














































































































Отзывы:

Нет отзывов

Похожие инструкции для Defender MSS

Velocifero MAD GOLF Manual preview
MAD GOLF
Бренд: Velocifero Страницы: 71

Бренды по названию

Популярные бренды

Загрузить еще бренды