VideoRay Defender MSS Скачать руководство пользователя страница 32

Страница: 32 / 109

ROV Orientation and Directions Reference

Bow - The front of the ROV.

Stern - The rear of the ROV

Port - The left side of the ROV when facing forward.

Starboard - The right side of the ROV when facing forward.

Fore - Towards the front or The forward direction.

Aft - Towards the rear of the rearward direction.

Surface - To ascend or move up in the water column to a shallower depth.

Dive - To descend or move down in the water column to a deeper depth.

ROV Attitude and Motion Reference

Surge

- Forward and Reverse motion of the ROV, forward is positive.

Heave

- Up and Down motion of the ROV, up is positive.

Sway

- Left (to port) and Right (to starboard) lateral motion of the ROV, left is positive.

Yaw

- Right (to starboard) and Left (to port) rotational motion of the ROV, right (clockwise, viewed from the

top) is positive.

Pitch

- Bow Up or Bow Down inclination of the ROV, bow up (clockwise, viewed from the port side) is

positive.

Roll

- Port UP or Port Down relative to Starboard, port up (clockwise, viewed from the rear) is positive.

Содержание Defender MSS














































































































Результаты поиска

Содержание Defender MSS

Отзывы:

Похожие инструкции для Defender MSS

Бренды по названию

Популярные бренды

VideoRay Defender MSS, Руководство оператора

Результаты поиска

Содержание Defender MSS

Отзывы:

Похожие инструкции для Defender MSS

Бренды по названию

Популярные бренды