![background image](http://html1.mh-extra.com/html/videoray/defender-mss/defender-mss_operators-manual_1015614046.webp)
Switch
left
ROV
Power
Switch
User Control
Console top central
left
Turns the ROV power on and off. Twist in the direction of the arrows to
turn on the ROV power and press the switch to turn it off.
LIM
Module
User Control
Console top central
right
Test and Reset buttons can be found on the LIM.
The User Control Console top includes the following connections:
CONNECTION
LOCATION
FUNCTION
Power (100-240 Volts AC, 50, 60
Hz)
IEC male
Used to connect the User Control Console to a power
source.
The User Control Console side includes the following connections:
CONNECTION
TYPE
FUNCTION
Tether Whip
(
8 pin round
female
Used to connect the User Control Console to the tether for power,
communications, video and accessory support.
Monitor Power
Provides 12 Volts DC. Used to provide power to the monitor.
Monitor Signal
Display Port
Female
Used to provide the video signal to the monitor.
USB Ports (3)
Type A
female
Can be used to connect USB devices to the computer via the User
Control Console.
Ethernet
RJ-45
female
Can be used to connect the User Control Console to the computer for
Ethernet based ROV accessories.
The Display Port cable uses a locking locking connector. Make sure to press the release button when
disconnecting the cable to avoid damaging the connector.
Computer
The computer provides the hardware and operating system platform for VideoRay ROV control
software and image and video editing and production. The computer is embedded in the User Control
Console.
Содержание Defender MSS
