manualshive.com logo in svg

VideoRay Defender MSS, Руководство оператора


Поделиться
Скачать
background image

MSS Defender

 

Operator's Manual, 1.00.00

Quick Start Instructions

These Quick Start Instructions are streamlined to cover just the essentials of operating your MSS Defender
system. They are provided to get you started as quickly as possible, while keeping you and the equipment
safe. They cover the equipment set up and basic operation, but are not intended to result in a
comprehensive base of knowledge or set of operational and piloting skills. The remaining sections of this
documentation should be referenced for a complete understanding of the features, capabilities, operating
procedures and maintenance requirements of your MSS Defender system.

Topics in this Section

Safety First
System Components
Pre-Dive Preparations
Dive Operations
Post-Dive Operations

Safety First

 

 Operating electrical devices in and near the water can be dangerous. There

is always a risk of drowning or electrocution in such an environment. Reduce these risks by using
common sense and observing safety regulations and recommended safe practices including the
following:

Never handle power cords while in contact with water or allow power cord connectors or the
control panel to enter the water. The only components that can safely be placed in water are the
submersible, any onboard accessories and tether, and only after making sure the connections
are secure.

Always test the safety components, such as GFCI switches and interlock devices, before
beginning operations. Follow the procedures described in this manual for.

Have proper safety equipment, such as PFDs (Personal Flotation Devices), on hand and make
sure you know how to use them before you need them.

Содержание Defender MSS














































































































Отзывы:

Нет отзывов

Похожие инструкции для Defender MSS

Бренды по названию

Популярные бренды

Загрузить еще бренды