VideoRay Defender MSS Скачать руководство пользователя страница 49

Страница: 49 / 109

MSS Defender

Operator's Manual, 1.00.00

Hand Controller

The hand controller is used to operate the VideoRay and its features. Several types of hand controllers
are supported. Controllers not included in your configuration are available from VideoRay for
purchase. Supported controllers include:

VideoRay IP65 Hand Controller

Microsoft Xbox Elite Gamepad Style Hand Controller

The hand controller functions are described in more detail in the following pages of this guide.

Hand Controller Compatibility

Any Microsoft

Windows

compatible game controller can be used with the MSS, but each controller

requires a configuration file to map the joystick, buttons and knobs to the ROV functions.

Microsoft is a registered trademark of Microsoft. Windows is a registered trademark of Microsoft.

Logitech is a registered trademark of Logitech.

Forward / Reverse Control

The joystick is used to control the forward / reverse motion of the ROV.

Location

Содержание Defender MSS














































































































Результаты поиска

Содержание Defender MSS

Отзывы:

VideoRay Defender MSS, Руководство оператора, Страница: 49 / 109

Результаты поиска

Содержание Defender MSS

Отзывы: